-40%

For Ford F150 F250 F350 F450 F550 (2004-2016) Chrome Emblem Logo Backup Camera

$ 79.19

Availability: 39 in stock
  • Type: Rear View Monitor w/Cam Kit
  • Custom Bundle: No
  • Restocking Fee: 15%
  • Condition: New
  • All returns accepted: Returns Accepted
  • UPC: 819952029607
  • Model: CMT-FE04C
  • MPN: MT-FE04C
  • Compatible Vehicle Make: Ford
  • Modified Item: No
  • Item must be returned within: 30 Days
  • Non-Domestic Product: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Screen Size: 4"
  • Return shipping will be paid by: Seller
  • Brand: Master Tailgaters

    Description

    Master Tailgaters Replacement for Ford
    F150, F250, F350, F450, F550
    Emblem WITH Backup Reverse Camera ( Full Color Camera)
    COLOR
    : Chrome
    For use with( Years):
    Ford F150, F250, F350, F450, F550 (2004-2016)*
    *Note- Prior to ordering, measure your current emblem. This replaces all Ford large oval emblems located at the center of the tailgate.
    **Important- This will not work as a replacement for OEM systems! If your truck has an existing OEM Backup Camera and you are looking for a replacement, this will not work!!
    Installation:
    This backup camera can be connected to any aftermarket monitor with a Yellow RCA input. Typically the factory emblem is attached to your truck with double sided tape. Use a heat gun, at a low heat setting, and use a piece of floss between the emblem and tailgate to remove the old emblem. On some older models, you may need to drill a small hole in your tailgate to run the wiring through. Most 2006+ models come with the holes already drilled.
    **Warning – the product may require modification to the tailgate. To check, remove the Ford Emblem and see if your tailgate has the cutouts for the mounting holes. If you do not see mounting holes behind the emblem, you will need to cut the tailgate to mount this backup camera.
    Description:
    This is an Genuine Ford Emblem (part #CL3Z-9942528-B), aftermarket Chrome base, and  backup camera. For the power supply, you can connect it to any 12V power source. For example, if you wanted the camera to always be on, you can connect it to a 12v source that is on all the time, or if you only want it when you reverse you can connect it to the reverse taillights. Includes video cable 8 meters long to reach your monitor.
    *Ford Genuine mounting screws and clips included!
    Camera Specs:
    Image sensor : 1/4" OV136 CCD Chip
    Signal System : NTSC/PAL
    Effective Pixel : NTSC: 728 x 582
    Minimum Illumination : 0.5 Lux
    Video Output : 1.1Vp-p 75 Ohm
    Electronic Shutter : 1/50 to 1/100,000 seconds
    Resolution : 600 TV line
    Angle : 170 Degree
    Waterproof Rate : IP68
    Current Consumption : 120mA Max.
    Power : DC 12V
    Cable Length : Video Cable 8 Meters
    Attention!!!:
    -Before purchasing check the back of your Monitor/Screen that you have a Yellow RCA input for easy installation.
    -Installation is still possible without the Yellow RCA, however it is much more difficult and will require a professional to splice in the Video In signal.
    -
    This will not work as a replacement for OEM systems! If your truck has an existing OEM Backup Camera and you are looking for a replacement, this will not work!