-40%
Industrial 30A 8 Channel I2C Relay 30A Electromagnetic PCF8574 For Arduino Rpi
Industrial 30A 8 Channel I2C Relay 30A Electromagnetic PCF8574 For Arduino Rpi
Industrial 30A 8 Channel I2C Relay 30A Electromagnetic PCF8574 For Arduino Rpi
Industrial 30A 8 Channel I2C Relay 30A Electromagnetic PCF8574 For Arduino Rpi
Industrial 30A 8 Channel I2C Relay 30A Electromagnetic PCF8574 For Arduino Rpi

Industrial 30A 8 Channel I2C Relay 30A Electromagnetic PCF8574 For Arduino Rpi

$ 21.11

Availability: 10 in stock
  • All returns accepted: Returns Accepted
  • Item must be returned within: 14 Days
  • Application: Charging/Power
  • Return shipping will be paid by: Seller
  • Condition: New
  • Suitable For: Interior
  • Refund will be given as: Money Back
  • Brand: KRIDA Electronics

    Description

    8 Channel Electromagnetic Relay Module with I2C Interface
    Compatible with Home Assistant / ESPHome
    - PCB board dimension 130mm x 150mm
    - Compatible with DIN rail plastic holder
    - Operation DC voltage – 12.0V DC
    - Maximum current @12.0V DC – 1000mA
    - Maximum current per relay – 30A peak
    - LEDs indicators for each electromagnetic relay channel
    - Relays with SPDT switch contacts: Normally Open, Common, Normally Closed
    - Relay contact resistance 100 milliohms max. ( initial value )
    - Relay insulation resistance 100 MOhm min. (DC 500V)
    - Relay operation time 8 ms max
    - Relay release time 5ms max
    - Relay dielectric strength 750 VAC, 50/60Hz between contact
    - Relay dielectric strength  1,500 VAC, 50/60Hz between all elements
    - Relay expected life Mechanical - 10,000,000 operations min.
    - Relay expected life Electrical - 100,000 operations min. at rated load
    - Working temperature range - 25 C ~ + 80 C
    - Comes with different slave address 0x27 or 0x3F, depends on the batch
    - Each board can be assigned an I2C address between 0x20...0x27 (0x38...0x3F) by the DIP switch
    - The module contains an PCF8574 or PCF8574A chip
    - The logic power supply voltage should match the voltage levels on the I2C bus. The SDA and SCL lines are pulled up to VDD with 5.6k resistors on the relay module.
    - Up to 8 boards can be connected to I2C bus line.
    USER MANUAL -
    https://drive.google.com/file/d/1aSJTKT-qFkrLvg_Ums7SrhqTwENMHzQY/view?usp=sharing
    Arduino sample code for 0x27 slave address -
    https://drive.google.com/open?id=1bhoR4dusLg54g0WM_b_a0Efto5wGJ3SZ
    Arduino sample code for 0x3F slave address -
    https://drive.google.com/open?id=14HXx25LMoYRrmThCqxxRv5AvvmoChJDV
    Code for controlling each channel separately -
    https://drive.google.com/open?id=1xvJZBvRlOtW8DJ1urEnSKOScQ5fM5Zs1
    Multiboards controlling code -
    https://drive.google.com/open?id=131HilQV8ZbCkEMC_oS3NJGbEQn-aUKaF
    Device controlling via ESP8266 and REMOTEXY APP -
    https://youtu.be/qEnsk7ZU8qE
    Home Assistant *yaml code -
    https://drive.google.com/file/d/1puJG7e_3uAKEAuQfctY5cBt5C62L2Q1I/view?usp=sharing